High Quality Parking Space LED Indicator
Installation of S plit-type Sensor and I ndicator Light Sensor and Indicator Light are installed 1.5m-4.0m right above the parking space. The installation height is advised to be 2.5m. The sensor is installed in parking space. The Indicator Light is installed 2.5m away from the sensor in the...
Installation of Split-type Sensor and Indicator Light
Sensor and Indicator Light are installed 1.5m-4.0m right above the parking space. The installation height is advised to be 2.5m. The sensor is installed in parking space. The Indicator Light is installed 2.5m away from the sensor in the direction of vehicle head. The installation environment of sensor:
The humidity range is 40%~70%RH. The schematic diagram of installation is as below:
(Including explanation of the location and height range, schematic diagram of installation location and height)
5.2 Installation method of Split-type Sensor and Indicator Light
The installation methods of Split-type Sensor are introduced below. The installation methods of Indicator Light and sensor are the same.
Installation step of the device is as below:
Cable tray installation surface can at least bear 3 times weight of the split-type ultrasonic sensor.
Step 1 Firstly, open a wire hole with the diameter (RVSP4*0.75、RVV2*0.5) of Φ30 at the corresponding location of the cable tray.
Step 2 Fasten the chassis with the hand on the cable tray installation surface. Open 2-4 screw holes with the diameter of φ4 on the cable tray through installation hole for installing chassis.
Step 3 Fasten the chassis on the cable tray with 2-4 self-tapping screws with diameter of φ4*10.
Step 4 Insert RVSP4*0.75 (RS485 power line) and RVV2*0.5(control line of the Indicator Light ) into the corresponding welding-free socket of the sensor respectively
Step 5 Connect the fastening base with the main body of the sensor (firstly, matching up by aligning at the rotary ear, and rotate the main body of the probe counterclockwise and fasten it).